Aluminum Patio Doors / Pocket Glass Doors
Pocket Glass Door Systems
Pocket glass doors represent the ultimate in disappearing wall technology. Each panel slides effortlessly into a concealed wall pocket, giving you a 100% clear opening — no stacked panels, no folded panels, just open air and uninterrupted views.
Ideal for Houston luxury homes, pool areas, and outdoor entertainment spaces, our pocket door systems feature thermal break aluminum frames with concealed hardware for a clean, minimal aesthetic. When closed, floor-to-ceiling glass panels flood your interior with natural light.
- • 100% clear opening — panels fully concealed in wall pockets
- • Concealed rollers and flush-pull handles for minimal aesthetic
- • Thermal break aluminum profiles for energy efficiency
- • Multi-point locking for full security
- • 2 to 6 panel configurations up to 30ft wide
- • New construction and retrofit options
Prefer panels that stack visibly? See our slide & stack doors. Want a folding option? Check our bifold doors.
See Pocket Doors in Action
Fully open, fully closed — discover the dramatic transformation pocket glass doors deliver.
Pocket Glass Door Installation Guide
Every pocket glass door system we supply includes a comprehensive installation guide. Below is an overview of our four-phase installation process — from frame assembly to final sealing and adjustment.
Download Full Installation Guide (PDF)Frame Assembly
The outer frame is pre-assembled using the upper track, bottom track, and vertical frame material. Corner brackets are secured, ensuring all joints are square and flush before the frame is moved to the opening.
- Upper track + vertical frame joined at 90°
- Bottom track secured with corner anchors
- Frame squareness verified with diagonal measurement
- All hardware pre-fitted before installation
Outer Frame Installation
The assembled frame is set into the prepared rough opening. Shims are used to plumb and level the frame. Anchor bolts are installed through the vertical frame members into the structural framing at recommended intervals.
- Frame centered in rough opening
- Plumb and level confirmed on all four sides
- Anchor bolts tightened — frame locked in position
- Gap between frame and opening sealed with foam backer
Panel & Hardware Installation
Glass panels are lifted onto the upper track first, then set onto the bottom track rollers. Roller height is adjusted until each panel glides smoothly. Flush-pull handles and multi-point locks are installed and aligned.
- Panels hung from concealed upper track rollers
- Bottom guide adjusted for smooth operation
- Multi-point locking mechanism aligned and tested
- Weatherstripping and end seals fitted
Sealing & Final Adjustments
Interior and exterior perimeters are caulked and sealed. Panels are tested for smooth operation, proper closure, and lock engagement. A final alignment check ensures even gaps around all panels.
- Exterior perimeter caulked with weather-grade sealant
- Interior trim and reveal covers fitted
- All panels tested for smooth operation
- Lock function and weatherseal contact verified
Installation Complete
Final sealing, trim, and panel alignment are verified before handover.
Full guide PDFWe handle the full installation — you don't lift a finger.
Our in-house installers follow this exact process on every job. Learn about our installation service →
Pocket Glass Doors FAQ
Pocket glass door questions, answered
Tap any topic for the full answer. Content is rendered for crawlers in the initial HTML.